| Shareware Listings | |  | | Rating: 0 | | | Total Hits - 0 | Hits Today - 0 | View Ratings | Add Your Rating | | |  | | | | | The calculation is designed for a geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Automatic design of a connection bolt of standard design.
- Calculation and check of connections fitted with special shanks.
- Design and calculation of necessary mounting prestressing of the connection and fastening torque.
- Calculation of force conditions of a loaded connection.
- Static and dynamic strength check.
- Calculation of joint parameters for a specific working temperature.
- The application includes a table of commonly used materials of bolts according to ISO, SAE and ASTM, and a
selection of materials of the connected parts according to AISI / SAE, DIN, BS, AF and others.
- Support of 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD)
The calculations use data, procedures, algorithms and data from specialized literature and standards ANSI, ISO, DIN.
Used standards: ANSI B1.1, ANSI 273, ANSI B18.2.1, ANSI B18.2.2, ANSI B18.3, ANSI B18.6.2, ANSI B18.6.3, ANSI B18.22.1, ASTM A193, ASTM A307, ASTM A320, ASTM A325, ASTM A354, ASTM A449, ASTM A453, ASTM A490, ASTM A574, ASTM F568M, ASTM F593, ASTM F2281, SAE J429f, ISO 273, ISO 1207, ISO 4016, ISO 4032, ISO 4035, ISO 4762, ISO 8738, ISO 8839, EN ISO 898, EN ISO 3506, EN 10269, EN 28839, VDI 2230.
This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives,
springs, beam, shaft, bolt connection, shaft connection, tolerances and many others. | | | http://www.mitcalc.com/index.htm | Last Updated on 7/26/2017 6:15:00 PM | | | Download | Version 1.25 | | Rating: 0 | | | Total Hits - 2 | Hits Today - 0 | View Ratings | Add Your Rating | | | | | | | | The calculation is intended for geometrical design and strength check of force couplings of shafts with hubs with a cylindrical contact area (Interference fit, clamping connection). The application provides solutions for the following tasks:
- Design of force fits, possibly shrink fits.
- Design of clamping connections with separated, or one-side cut hub.
- Strength check of designed couplings.
- Check of interference fit strained by additional radial force with bending moment.
- Check of interference fit working at specific service temperature.
The calculation is based on data, procedures and algorithms from specialized literature and standards ANSI, ISO, DIN and others. List of standards: ANSI B4.1, ISO 286, DIN 7190.
This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others. | | | http://www.mitcalc.com/index.htm | Last Updated on 8/3/2017 3:22:00 PM | | | Download | Version 1.20 | | Rating: 0 | | | Total Hits - 0 | Hits Today - 0 | View Ratings | Add Your Rating | | | | | | | | The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels (max. 15). Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Calculation of the necessary length of the belt (chain) using known positions and diameters of sprocket wheels
- Achieving the desired (table) length of the belt / chain using a change in the position of the selected sprocket wheel.
- Calculation of geometry (angles of wrapping, numbers of teeth in engagement, axis distances, etc.)
- Calculation of the radial force acting on the sprocket wheel axis.
- Support of 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD).
This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others | | | http://www.mitcalc.com/index.htm | Last Updated on 8/3/2017 11:51:00 AM | | | Download | Version 1.21 | | Rating: 0 | | | Total Hits - 0 | Hits Today - 0 | View Ratings | Add Your Rating | | | | | | | | The calculation is intended for the geometric design and strength check of couplings using pins and clevis pins. The program is used to solve the following tasks:
- Design of pin for spring attachment.
- Design of couplings with securing pins.
- Design of cross pin in rod and sleeve.
- Design of radial pin for shaft-hub connection.
- Design of longitudinal pin for shaft-hub connection.
- Design of clevis pin for rotating rod-clevis connection.
- Strength check of designed couplings.
- The program includes dimensional tables for pins and clevis pins according to ANSI, ISO, DIN, BS, JIS and CSN.
- Support of 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD).
The calculation is based on data, procedures and algorithms from specialized literature and standards ANSI, ISO, DIN and others. List of standards: ANSI B18.8.1, ANSI B18.8.2, ISO 2338, ISO 2339, ISO 2340, ISO 2341, ISO 8733, ISO 8734, ISO 8735, ISO 8739, ISO 8740, ISO 8741, ISO 8742, ISO 8743, ISO 8744, ISO 8745, ISO 8746, DIN 1, DIN 7, DIN 1443, DIN 1444, DIN 1470, DIN 1471, DIN 1472, DIN 1473, DIN 1474, DIN 1475, DIN 1476, JIS B 1352, JIS B 1354, JIS B 1355, BS EN 22339, BS EN 22340, BS EN 22341, CSN EN 22339, CSN EN 22340, CSN EN 22341. | | | http://www.mitcalc.com/index.htm | Last Updated on 8/2/2017 3:31:00 PM | | | Download | Version 1.19 | | Rating: 0 | | | Total Hits - 0 | Hits Today - 0 | View Ratings | Add Your Rating | | | | | | | | This calculation deals with the deflection, stress and variation of forces in the loaded flat plates. The calculation is designed for plates that are flat, homogeneous, with the same thickness and made from one material. The plates may be circular, annular circular and rectangular. The plates may be loaded evenly (unevenly) on the whole surface (or its part) or they may be loaded by the force distributed on the circle. The programme enables:
- Selection from circular, annular circular or rectangular plates
- Selection of various types of loading (distributed, forced...)
- Calculation of deflection, slope, moment and stress in a random point
- Display of graphs of the shape of the figures calculated
- Calculation of safety coefficient
- Calculation of the minimum plate thickness or maximum loading
The calculation uses the data, procedures, algorithms and information from the professional literature (Roark formulas, Machinery''s Handbook 26th, Teorie desek a skorepin [doc. Ing. Ladislav Subrt, CSc.] and others) | | | http://www.mitcalc.com/index.htm | Last Updated on 8/1/2017 12:50:00 PM | | | Download | Version 1.15 | | Rating: 0 | | | Total Hits - 0 | Hits Today - 0 | View Ratings | Add Your Rating | | | | | | | | The calculation solves area characteristics of profiles created in a simple graphic editor and mass characteristics of solids created by extrusion or rotation of the profile. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following tasks:
- Creation of a profile in a simple graphic editor.
- Calculation of area characteristics (Ix, Sx) for main axes passing through the centre of gravity.
- Calculation of area characteristics (Ix, Sx) for randomly turned axes passing through the centre of gravity, including a graph.
- Calculation of characteristics for the turned axes which pass through a random point.
- Calculation of volume and mass characteristics (V, m, Im) of solids created by extrusion or rotation of the profile.
This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others | | | http://www.mitcalc.com/index.htm | Last Updated on 8/3/2017 1:28:00 PM | | | Download | Version 1.20 | | Rating: 0 | | | Total Hits - 1 | Hits Today - 0 | View Ratings | Add Your Rating | | | | | | | | The calculation concerns solutions of pressure vessels and their components. The calculation solves deformations and curves of stress in rotational shells loaded with axial force, pressure, radial force and a bending moment. This program is intended for homogeneous shells of identical thickness and a single material. The calculation also enables solutions for connecting two shells of different parameters (thickness, material, dimensions...).
The program enables:
- Calculation of cylindrical, conical and spherical thin-wall shells.
- Calculation of a cylindrical and spherical thick-wall shells.
- Calculation of a round plate.
- Selection of various loading methods (joint, force, moment, rotational, load with fluid...).
- Calculation of deformation, radial shift, moment and stress in any point.
- Visualisation of charts with curves of the calculated values.
The calculation uses the data, procedures, algorithms and information from the professional literature (Roark formulas, Machinery''s Handbook 26th, Teorie desek a skorepin [doc. Ing. Ladislav Subrt, CSc.] and others) | | | http://www.mitcalc.com/index.htm | Last Updated on 8/5/2017 4:02:00 PM | | | Download | Version 1.13 | | Rating: 0 | | | Total Hits - 0 | Hits Today - 0 | View Ratings | Add Your Rating | | | | | | | | The calculation is to be used for geometrical and strength design of metal springs of various types and designs, subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
1) Geometrical design and calculation of working cycle parameters for metal springs of the following types and
designs:
- Helical cylindrical compression springs of round wires and bars
- Helical cylindrical compression springs of rectangular wires and bars
- Helical conical compression springs of round wires and bars
- Helical conical compression springs of rectangular wires and bars
- Belleville springs
- Helical cylindrical tension springs of round wires and bars
- Helical cylindrical tension springs of rectangular wires and bars
- Spiral springs
- Helical cylindrical torsion springs made of round wires a bars
- Helical cylindrical torsion springs made of rectangular wires and bars
- Torsion bar springs with round section
- Torsion bar springs with rectangular section
- Leaf springs with constant profile
- Leaf springs with parabolic profile
- Laminated leaf springs
2) Automatic proposal (finding) of a spring with suitable dimensions.
3) Static and dynamic strength check.
The application includes a table of commonly used spring materials according to EN, ASTM/SAE, DIN, BS, JIS,
UNI, SIS, CSN and others. The calculation is based on data, procedures, algorithms and data from specialized
literature and standards EN 13906, DIN 2088, DIN 2089, DIN 2090, DIN 2091, DIN 2092, DIN 2093, DIN 2095,
DIN 2096, DIN 2097. This module is a part of MITCalc - Calculation Package for gear, belt and chain drives,
springs, beam, shaft, bolt connection, shaft connection, tolerances and many others. | | | http://www.mitcalc.com/index.htm | Last Updated on 7/28/2017 4:57:00 PM | | | Download | Version 1.17 | | Rating: 0 | | | Total Hits - 0 | Hits Today - 0 | View Ratings | Add Your Rating | | | | | | | | The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Simple definition of the type of beam and its loading with visual check.
- Calculation of area characteristics of 20 types of cross sections.
- Calculation of reactions in supports.
- Calculation of minimum / maximum bending moment, stress and deflection of the beam.
- Calculation and graphic illustration of the moment, stress, deflection and bending angle of the loaded beam.
The application includes a table of materials and a table of area characteristics of W, S, C, L profiles acc. to
ANSI/AISC and I, U, L a T profiles acc. to DIN/ISO.
Used standards: DIN 1025, 1026, 1028, 1029, 1024, AISC W, S, C, L, LU
This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt
connection, shaft connection, tolerances and many others | | | http://www.mitcalc.com/index.htm | Last Updated on 7/27/2017 4:00:00 PM | | | Download | Version 1.21 | | Rating: 0 | | | Total Hits - 0 | Hits Today - 0 | View Ratings | Add Your Rating | | | | | | | | Solutions to dozens of basic formulas from physics, technology and mechanical engineering. Help, pictures as well as many selection tables with values of various coefficients and material properties are available for the formulas. The following matters are solved in the workbook:
- Characteristics of solids (volume, surface, weight, inertia moment)
- Rectilinear motion (speed, acceleration, trajectory, time, force, energy....)
- Rotation motion (speed, acceleration, trajectory, time, force, energy....)
- Thermal expansion (longitudinal, cubical)
- Friction (shear, rolling, journal, rope, belt)
- Design of engine capacity (pump, blower, hoist, crane)
This module also includes a workbook with conversion of units, many technical tables, workbook with Vehicle aerodynamics and workbook with External ballistics.
Vehicle aerodynamics - The program is intended for simple simulation of vehicle motion. The program solves the following tasks:
- Simple definition of vehicle parameters.
- Selection from a list of typical vehicles.
- Calculation of forces.
- Calculation of the load, energy, consumption and travel distance.
External ballistics - The program is intended for simple simulation of the firing of various types of bullets. The program solves the following tasks:
- Definition of the bullet.
- Selection from the list of typical bullets.
- Calculation and selection of typical ballistic coefficients.
- Calculation of the forces, velocities, trajectories, angles and other external ballistic parameters.
- Graphic representation of the results of one or two bullets.
Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others. | | | http://www.mitcalc.com/index.htm | Last Updated on 8/5/2017 2:13:00 PM | | | Download | Version 1.22 |
|
|
